|Style:||One Glass Lens||Size:||12.5*10.5cm|
|Applicable People:||Adults||Material:||PC+Liquid Silica Gel + Glass Lens|
|Weight:||180g||Color:||Black/black + White/black + Pink Frame/black Low + Yellow Frame|
Lightweight Prescription Scuba Diving Goggles,
Anti Scratch Prescription Scuba Diving Goggles,
Ergonomic Goggles Scuba Diving
ZT1805 Diving Mask Adult Free Diving Mirror Silicone Compact And Easy To Carry White/Pink Color
This is a diving mirror with ergonomic design concept, very fit to the face, comfortable to wear, can be used fo free diving
•Resin lens, uv resistance, high transmittance, clear vision, no deformation of the picture
•Food grade liquid silica gel, safety and environmental protection
•Ultra low volume, 180 degree field of vision
•New design silicone skirt hem, more comfortable to wear
•Fast adjustable microstrip buckle system
|Material||Liquid silica gel + resin lens|
|Style||Two glass lens|
Rinse the whole mirror with fresh water after use, and clean the salt on the mirror, then dry it and place it in the mirror box.
(1) Adjust the fixed band to the appropriate tightness before wearing the face mirror.
(2) First put the mirror on the right position of the face.
(3) Use the nose to inhale the mirror adsorption on the face.
(4) Adjust the left and right ends of the fixed band to appropriate tightness by quick adjustment buckle, and the fixed band of the mirror should be above the ear (tightness should not be too tight).
(5) Hair or head coverings (no hair or head coverings should be pressed on the skirt of the mirror).
(6) After diving, use quick adjustment buckle to loosen the fixed band of the mirror.
(1) Failure mode 1: water enters the mirror
A mirror skirt appeared pressure hair, pressure head cover;
B side mirror is too loose or too tight;
C) breathing through the nose;
A. After wearing the face mirror, check whether the hair and head cover press the skirt of the face mirror;
B. Adjust the face mirror to appropriate tightness;
C Develop the habit of breathing through your mouth.
(2) Failure mode 2: The tightness of the mirror cannot be adjusted
A quick adjustment buckle is damaged;
B side mirror fixed belt pulling direction is wrong;
A scrap treatment;
B. The direction of the fixed belt of the drawing mirror should be the rear direction of both sides rather than the oblique rear direction;
(3) Failure mode three: the lens is broken
A mirror hit by hard objects resulting in damage;
A replace or repair parts;
B Diving equipment maintenance service point or manufacturer maintenance.
Enter Your Message